Orton Vent Master

All kilns should be vented to the outside.Orton received the Original patent in 1988 for Downdraft venting of Electric Kilns.Today they offer the “VentMaster”. Easy to install, it prevents fumes from entering the workspace, makes sure there is enough oxygen in the kiln for colors to fully develop, improves the temperature uniformity inside the kiln and helps increase the life of the heating elements.The VentMaster can vent a single kiln up to 12 Cu Ft in size. An Expansion Kit (C-137-011) can be purchased to use the system for 2 kilns totaling less than 20 Cu Ft or 1 large oval kiln between 12-20 Cu Ft.Holes are drilled in the lid and floor based on the size of the kiln. The collection cup is installed under the kiln and connected to the blower motor by the 4 Ft high temp hose provided with the unit. A cap closes off the 2nd inlet when only one kiln is vented. The Blower Motor/Housing can be placed on the floor or mounted to the studio wall and plugs into a standard 120 volt outlet.