ART Phantom I Active Direct Box with Phantom Power - Single Channel

Direct boxes are the sound engineers’ Swiss Army knife! Here are some examples: Problem: You need to connect an amplifier’s speaker output to the mic input on a mixer.Solution: Connect a Phantom I between the speaker output and a mic input with phantom power on the mixer, then set the attenuation switch to –40dB. Problem: Your PA is humming because there is a ground loop between a signal source and the mixer.Solution: Connect a Phantom I between the signal source and a mic input with phantom power and set the ground switch to Lift. Problem: You need to connect an unbalanced line-level source (ie: a synthesizer, another mixer, an effects device, etc.) to a mic input on the mixer.Solution: Connect a Phantom I between the source and a mic input with phantom power and set the Attenuator switch to –20dB. SPECIFICATIONS Signal To Noise Ratio: 100dB Input Level: -10 to +40dB Output Level: -10 to +2dB Input Connections: Dual 1/4 in, unbal. inputs are parallel Output Connections: XLR Bala