JDC Titanium License Plate Mounting Kit (Universal)

JDC Titanium License Plate Mounting Kit The JDC titanium license plate mounting kit allows you to swap out your old, rusty bolts with beautiful titanium! The kit is available in three options. Make sure to check your factory hardware for the correct replacement before ordering. Some cars will have a self-tapping screw with larger threads, and some will be a tighter M6x1.0 thread. Options are below: Bolts & Washers: (2) M6x1.0x20mm custom head bolts (2) Custom flush mounting washers (2 outer diameter sizes available)(Made to thread into your existing license plate holes. Check for proper thread pitch before ordering.) Bolts/Nuts/Washers: (2) M6x1.0x20mm custom head bolts (2) Custom flush mounting washers  (2 outer diameter sizes available) (2) Two small washers for the back (2) Nylon locking nuts. (This kit would be for use on cars that don't have a normal M6x1.0 thread pitch or any threads at all.) Self-Tapping Screws/Washers: (2) M5x17mm or M6x17mm Custom head self-tapping