Directions - Instructions

  Closed Loop Solvent Extractors     Assembly and Set-up       Warnings This product is not intended to prevent, treat or cure any disease. We are not liable for the mis-use and abuse of the product in any way shape or form. Solvents can be very flammable and should never be used near any open flame! Repeat, NO OPEN FLAMES! Exercise precaution! Use at your own risk! 18+ Only Follow your local state and county rules!               First Test your seals and tape joints 1.Using a 6cfm Purge pump or similar pull a vacuum on the system. 2.Take a spray bottle filled with soapy water and spray around all tape joints and seals. If any spots bubble take note and retape that joint. If any seals leak *make sure they are clean of debris and properly seated. repeat step 1 and2 until no leaks.    The LP5 tank must to be chilled below 32degrees! Colder to -60 is better. Ingredients needed: 5 -7lb bags of Ice Rock Salt 10lbs of dry ice           Start with a layer of Ice. Then sprinkle in some Ro