Surface Thermocouple Self Adhesive or Cement on Patch with 6 to 40 inches of Type K Fiberglass Wire and Miniature Connector
evosensors.com
Hardware / Heating, Ventilation & Air Conditioning

Surface Thermocouple Self Adhesive or Cement on Patch with 6 to 40 inches of Type K Fiberglass Wire and Miniature Connector

$27.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Evolution Sensors and Controls

View Store

Surface Thermocouple Self Adhesive or Cement on Patch with 6 to 40 inches of Type K Fiberglass Wire and Miniature Connector Type K thermocouple designed for surface temperature measurement with a nominal 1" long x .750" Wide x .010" Thick Polyimide Tape Fiberglass Reinforced Patch with Silicone Adhesive, 40 inches of lead wires and miniature male connector  Temperature Operating range -90 to 500°F (-70 to 260°C) with capabilities to 600°F (315°C) with thermal epoxy cement. Response Time the small flattened thermocouple juction and thin film polyimide can provide response time as fast as .015 seconds.  Sensor is made for Highly Accurate SLE grade 30 gage solid thermocouple wire with 900°F(482°C) rated fiberglass insulated wire. Surface Patch is self-adhesive design made with specially designs Polyimide and Fiberglass film layers measure 1" long x 1/2" wide (25mm x 12.7 mm) Wire Leads - 6 to 40" inches (3 ft 3 inches or 1 meter) Instrument Connection - miniature male flat pin t

Show More Show Less