H58 Heavy Duty Tenon Swedger

WATCH THE VIDEO ON USING THIS TOOL PRIOR TO USING IT!   https://www.youtube.com/watch?v=gJTLEuI-kuk The H58 mounts in your vise. The Kit comes equipped with 6 collets for most alto and tenor saxes. Two of the collets provided fit most alto saxes and the four larger collets fit most tenor sax tenons. There are other collets for sax and flute also available.  ~There are two methods used to shrink the tenons~  One is to use the tool much the same as you would a flute tenon shrinker. That is, tightening the tool a little and turning the neck, being careful not to kink it.   The second method and most preferred is to just put the neck tenon into the tool and tighten the tool 1/4 turn, loosen the tool, move the neck 1/4 turn and then tighten the tool 1/4 turn again, repeating until you get all the way around. Test fit and then if necessary, only go 1/8 turn the next time around at each step.   Best results are obtained if you limit shrinking to about .010" per collet. Other sizes are availab