Squadron 1/72 Squadron Crystal Clear Canopy - Spitfire Mk. V/IX (Airfix Heller or KP)

This canopy represents the main production Spitfire canopy. Note that most kits will need filling at the lowerwindshield line for the canopy to fit neatly. The sliding section is designed to overlap the rear piece, which mayneed to be trimmed, depending on the kit that is used. TRIMMING:Insert a new blade into your modeling knife or scalpel. To separate the canopy from its base. Score very gently around the ledge molded at the bottom. Do this very lightly at first. with minimum pressure. Repeat the process until the canopy pops away from the ledge. If you score too heavily at first, you risk slipping and ruining the canopy. Finally, any rough edges can be cleaned up by lightly sanding with a Squadron Tools® Extra Fine Sanding Stick. If you intend to separate the canopy for display in the open position, we suggest cutting the break-lines before you cut the canopy from its base. GLUING:Cyanoacrylate Super Glue can be used to fix the canopy to the kit. It gives a fast-setting permanent jo