Inclusive® Titanium Abutment Blank compatible with: Zimmer Dental Screw-Vent® 3.5 mm

Product DescriptionInclusive® Titanium Abutment Blanks are designed to be used for the production of custom titanium abutments. All digitally designed abutments are intended to be sent to a Prismatik Dentalcraft-validated milling center for manufacture.AccessoriesNoneContraindicationsInclusive® Titanium Abutment Blanks should only be used for the application described. The following conditions would contraindicate use of Inclusive Titanium Abutment Blanks: Wall thickness less than 0.5 mm Gingival margin diameter less than 0.5 mm wider than the implant Angle corrections of more than 30 degrees Less than 0.5 mm margin height Less than 4.0 mm post height Hybrid abutments (zirconia abutments with titanium base) are contraindicated by the conditions listed above, and in cases with angle correction or gingival height greater than 6 mm. A patient-specific finished device will consist of both the titanium base and zirconia coping.SterilityInclusive® Titanium Abutment Blanks are shipped NON-S