CRL Top Door Patch Fitting With 1NT303 Insert

CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate's glass panels, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template. The following guidelines are to be used when making a door using this hardware: Maximum Height: 102" (2.59 m)Maximum Weight: 194 lbs. (88 kg)Maximum Width: 42" (1.07 m) If the door exceeds any of these limitations, full door rails should be used. Glass Fabrication Required:One 3/4" (19 mm) DiameterHole and Corner Notch Do Not Use With:PH42L, PH42R, PH43L or PH43R Transom Patch Fittings. They Require European Door Patch Fitting PH21A. For 3/8" or 1/2" (10 or 12 mm) Glass | With or Without Locks | 2-3/4" (70 mm) Pivot Setback | Use Monolithic Tempered Glass