B.O.T.C.K- Bolt On TrackBar Correction kit 4runner Gen 3 & Prado 90

ATTENTION: STOP BUYING PARTS YOU DONT  NEED!!  Understand it and why you should want it before you buy it!  Make sure you understand the return/ restock fee policy!  You will need a drill and drill bits to drill one hole and also recommend to get a rivet nut tool.   In some cases , Please allow up to 36-48 hours to fulfill Designed for 3rd gen 4runner with 1.5” -3”+ lift     how do you know if you should get it?  Measure the bolt height difference.  Start with frame side track bar bolt.  While the vehicle is on even ground. Measure from ground to center of bolt.   Then do same for axle side bolt  measure from ground to center of bolt. Subtract the two numbers.   If you are between 1.5”-2.99” i recommend to run the bottom mounting hole. If 3” or taller then run the top hole!  When you lift a solid axle that has a track bar (aka panhard bar) depending on the lift height, the angle of that trac bar  becomes so steep, that any natural cycling of the axle will cause a feeling of being unst