Pushrod Jig for RV-10 & RV-14

Comes with 4x 1/2 inch, 4x 1 inch, 4x 1.125 inch and 2x 1.5 Overview: Efficiently create perfect pushrods with our innovative drilling jigs. Unlike the traditional method of using paper templates, our jigs offer a superior, precise approach. Simply follow these steps for optimal results: Preparation: Attach the jig to a full-length tube before cutting. Alignment: Ensure the tube is square. If needed, use sanding blocks against the jig for adjustments. Initial Drilling: With the pushrod end inserted, drill holes using a #30 size bit, guided by the jig. Add clecos progressively. Marking for Reassembly: After removing the jig, mark both the pushrod end and the tube to aid in later reassembly. Secondary Drilling Setup: Place a second jig at the appropriate distance on the tube. Drill two #40 size holes and secure with clecos. Cutting: Use a bandsaw to cut the tube, leaving an extra 1/32 inch beyond the jig. Finishing the Edge: Achieve a flush finish by sanding the tube