Zerosum Inertia - Cenotaph

MADE IN THE USA The Cenotaph is device meant for processing modular level audio signals. Line level or guitar level signals will work but need to be fed into a signal amplifier to get signal to modular levels before entering Cenotaph. If low level signals are used the results will sound like a bit crusher and be less stable and predictable which sometimes sounds cool, but overall it is recommended to stick with modular level signals like VCO waveforms straight out of the VCO. The audio signal is fed into two 6CB6 pentodes then into a 4046 PLL and 4013 Divider. Switchcraft 1/4” jacks and NOS military surplus tubes used. Hand wired and through hole assembly, PCB manufacturing, enclosure drilling and metal work all done in USA. For most stable results the left knob should be full clockwise/pointing to the right when third/right switch is in UP position. If center switch is in UP position then it doesn’t matter where left knob position is. It is recommended to start with all 3 knobs in fu