EDC TAP

TAPPING INSTRUCTIONS  Remove your old star-nut and tap the top of your steerer tube. This might sound daunting, but we've made it super easy to do on your bike, without even removing your fork. Remove your bar and stem Use the OneUp star-nut puller to remove your old star nut Using the self aligning steerer tap kit, tap a thread into your steerer until the tap bottoms out. SEE VIDEO and detailed instructions below. Please read entire instructions and consult your local bike shop if you are uncomfortable with performing the tapping procedure.  REMOVE YOUR STAR NUT Put your bike in a stand with the front wheel resting on the floor. If you don't have a bike stand, ensure that your bike is securely supported. Remove your top cap, top cap/headset spacers, stem and handlebar leaving at least 40mm of exposed steerer. This would be a good time to shorten your steerer tube if you have excess length above your stem.  We recommend 5-10mm of steerer above the stem. Apply some grease to the