"Y" Link Steering Using GM 1 Ton TRE

"Y" Link Steering Using GM 1 Ton TRE Part Number: YLINK  This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms. The taper it is the standard GM 1 ton. The adjustment is easier because we add Hex Head TRE weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint... These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are made for a 1 ton rig and much larger than stock. You will receive: 2 - 54" of 1.5" X .25" wall DOM tubing 2 RH - 7/8" Hex Head Weld Bungs, 18TPI for Tie Rod Ends 2 LH - 7/8" Hex Head Weld Bungs, 18TPI for Tie Rod Ends 2 RH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends 2 LH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends 4 - Tie Rod Ends, 1 for the Y Link, 2 for the Tie Rod,