Element Bushido: Front Inner Fenders

The fenders are designed for the stock Bushido configuration(SHORT BATERY TRAY) They can be used with the other Enduro body’s but may require some trimming on the overall width depending on the body. The inner fenders will be printed in Black. Hardware needed: 2-m3x8, 4-m3x6 To install: Remove the shocks from the shock tower, Remove the shock tower from the chassis and the forward most bumper mounting screw, lengthen your pan hard link by 1.2mm by un screwing a rod end 1 full turn, the shock tower inserts into the fender and is attached again with the three screws you removed, attach the slider joiner with the m3x6 to the slider, attach the slider joiner to the fender with the m3x8. IMPORTANT READ: IF A COLOR OS NOT SPECIFIED, YOUR ORDER WILL BE CYCLED TO THE BACK OF THE Q UNTIL I HEAR FROM YOU FOR YOUR COLOR SELECTION You are selecting the Backing (Color of the back of the Bed Side Insert) and the Surface (Color of the part you see from the side of the truck. Look at the renderings f