Tamiya Bug Rear Window Frame

Fits: Tamiya Sand Scorcher or Monster Beatle Bug Body (58452)Modifications Required: NoneColor: BlackWhat you Get: You will receive a set of window frames.What you Need: Lexan or other clear flexible plastic .02" - .04" thick, flexible CA glue The frame is printed flat and will require some careful bending pressing and clamping to hole it in place while the glue sets. Due to how thin the parts are, this was the best method to produce this part. Instructions: The frame consists of two parts. You will take the top frame piece that seats in the window from the inside an use it to trace the shape on your lexan or other "fo-glass" material. Trim the lexan on the inside of the cut. The bottom part will allow the lexan and the top part of the frame to rest down inside. Use some flexible CA glue on the seam to hole the frame together with the lexan installed. Allow it to fully cure before you put the window in the bug. From the inside of the bug align  one edge and then press the opposing edg