Lucky Sling Puck Game | 3D Printer Model Files

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL and 3MF 3D MODEL DESCRIPTION   A game where a type of puck plays sling in a not so lucky manner.   This STL file is recommended for FDM Printers and Resin Printers! Approximately Length: 39 cm    3D PRINT ASSEMBLY   You will need two 50 mm rubber band.   3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)   Line Width/ Nozzle: 0.4 mm First Layer Line Width: 0.48 mm / 120% Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab) Recommended Initial Layer Height:  0.16 mm Recommended Layer Height:  0.16 mm Recommended Perimeters/ Walls: 3. Recommended Infill (%): 10% (Gyroid) Needs Support: Yes. Build Plate Adhesion: Skirt.     The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.