2 Inch UTV Lift Kit | Polaris RZR 800 50 Inch Standard / XC - RZR 800 50" 2012+ OR No Sway Bars

RT Pro is proud to say this kit WILL NOT cause any CV binding issues for your RZR. Not every mfg can say that. We know ours works because we've tested the kit and can honestly say the rear will not droop any lower than the factory setup. We achieve this by relocating the UPPER shock mounts and not the lowers. This method improves the shock angles which require a lower spring rate to hold the vehicle at ride height. When retaining the stock springs however, the ride height is raised. This kit will allow you to back the "clickers" on your shocks down and still have the desired height needed for that additional ground clearance. So you get two things with this kit. A taller ride height PLUS an improved ride! Actual height gains will vary but expect approximately 1.5" rear lift and 2" front. We've found our best performance with these machines by setting the fronts 0.5-1" taller. OEM springs are known to sag. If you end up with less lift than expected and still have stock springs this may