Swing Arm Dragster Conversion Kit

Converts 225″ solid chassis to 235″ swing arm chassis. Rear clip is jig assembled and welded. Spliced to top and bottom rails behind mid-plate. Upper link package with (8) FK chromoly rod ends, torsion bar links, Strange Engineering aluminum 4-link housing, parachute mount, chromoly brackets, adjustable lower shock mounts. Cutting and welding required. Note: kit is available without rear housing Installation Instructions Initial Chassis Setup 4-Link Bars Assemble top links so they are 19 7/8" center to center of rod end. Assemble bottom swing arm so that the rod ends are 20 7/16" center to center. Install top and bottom bars with torsion bar links disconnected. Top Bars: Use top hole on rear housing bracket. Use 3rd hole down on chassis bracket. Swing Arm (Bottom Bars): Use bottom hole on rear housing bracket. Use 2nd hole up on chassis bracket. There should be no pre-load on any of the 4-link bars at this point. Shocks Center to center distance of shocks should be 13 1/2" Set both ad