EMAX NanoHawk VTX/RX Sled

    Tiny's LEDs EMAX Nano Hawk Mounting board. For TBS Pro32 Nano and non 32 nano pro VTX. Will work with TBS Tracer or Crossfire Nano, FrSky XM+, XM, M+, ImmersionRC Zepto and Atto RXs.  Installation instructions (There is an assumption that you know how things connect together without mounting board. The mounting board just makes wiring more clean) IF you do not know how your equipment connects together consult the manual FIRST. This will prevent issues. Tiny's LEDs and EMAX assumes no responsibility for damaging NanoHawk during installation.  Step 1.  Disassemble the NanoHawk. Remove motors and 4 AIO mounting screws.. Step 2. Clip pins under the VTX Flush with bottom of VTX. you will use these 4 pins to mount the new board. Remove the top set of plastic spacers from pins. there should be only 1 spacer on pins when done. This is the correct height. I desoldered Camera wires for building of install guide. You do no have to desolder them.  Step 3. Solder VTX to Mounting board. Solder