Ver. 2 LED Sequencer, Sequential Flash Control Module, 14+14 = 28 Channel, GND power/control | each

Sequential Control Module, 14+14 Channels 14 Channel Color A (typically White or Red) 14 Channel Color B (typically Yellow/Amber) GND power/control Ver 2.00 | each 300mA per channel MAX   Thank you for purchasing CorsoMotion’s LED sequential modules Ver2.00. With a very easy DIP switch function selector, you can choose functions from popular sequential motions. These LED sequential modules are designed to work with our ‘Custom Made Boards’ however, if you use less than 300mA per channel, other LED setups should be fine. These LED sequential modules require 12v car power and ground to operate. The input voltage for these modules is 12v car power and the outputs to control the LEDs operate on the ground. The current version does not support the Input ‘O’   Functions   Mode switch: You will use this module to your headlight or taillight. You can choose the mode with DIP switch #9. 9:Off – Taillight mode 9:On – Headlight mode Most of the animation functions will be the same but the majo