Ver. 2 Wifi LED Sequencer, Sequential Flash Control Module, 14+14 = 28 Channel, GND power/control | each

How to Enter Setup Mode: Press and hold the brake. Turn the parking lights on and off 10 times. On the 11th time, leave the parking lights ON. Release the brake—this will activate WiFi search mode. At this point, if you search for WiFi on your cellphone or PC, you should see a network named "Corso X" (A, B, C, or D). You can configure the channel (A, B, C, or D) using DIP switches 1 and 2. This allows you to use up to four separate modules, for example, two for the headlights and two for the taillights. Connecting to the Module: Connect to Corso X WiFi. The password is "password". Open a web browser and enter "1.2.3.4" in the address bar. The settings page will appear. Select your desired settings and make sure to click Save before navigating away. Once you finish configuring everything, turn off the parking lights. From now on, the module will operate according to your saved settings. DIP Switch Functions: Switch 1 & 2: Channel selection (A, B, C, or D). Switch 3: H