Black Ops Machine "Heavy Duty" Easy Bolt in Can-Am X3 Lower Ball Joint

These are the heaviest duty ball joints you can find. The housing and support cup is made from 4340 Chromoly steel, the stud is made from 300m steel, the dust boots are made from CR/Neoprene, and the adjustment plate cap is 6061 aluminum. They are fully adjustable and rebuildable! These will keep you riding longer, faster, and harder than ever before with the least amount of long-term maintenance possible. You can fully disassemble, clean, and re-grease and you are good to go for miles and miles again.INSTALL INSTRUCTIONS: Place the new ball joint in the freezer for an hour, or two Jack car up off the ground Place jack stands Remove wheel Remove the lower A-arm Use a 24mm socket and a hammer to tap the ball joint out with the stem facing downward Get the new ball joint out of the freezer Use a C clamp/ball joint press (with BRP cylinder) to press the new ball joint back in place Reinstall the A-arm and the wheel *** We always recommend replacing all of your ball joints at the same time