Black Ops Machine "Heavy Duty" Easy Bolt in Can-Am X3 Upper Ball Joint

These are the heaviest duty ball joints you can find. The housing and support cup is made from 4340 Chromoly steel, the stud is made from 300m steel, the dust boots are made from CR/Neoprene, and the adjustment plate cap is 6061 aluminum. They are fully adjustable and rebuildable! These will keep you riding longer, faster, and harder than ever before with the least amount of long-term maintenance possible. You can fully disassemble, clean, and re-grease and you are good to go for miles and miles again.INSTALL INSTRUCTIONS: Place the ball joint in the freezer for an hour, or two Jack car up off the ground Remove wheel Loosen ball joint nut Pry ball joint up from the back side Pull lower arm down and out of the way Use vice grips to hold socket over ball joint and hit socket downward with a hammer Heat the metal where the ball joint will be installed with a torch (not red hot, just enough to make it slightly expand) Get the ball joint out of the freezer and put it in the arm as quickly a