Manual Optical Receiver for Fiber Optic Remote Triggering of DS Strobes (Non-Pre-Flash)

Trigger your Ikelite DS-series strobe off any camera or strobe flash. The Optical Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The Optical Receiver (Non-Pre-Flash) supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported. An individual Optical Receiver is needed for each strobe. Use of multiple strobes requires one Optical Receiver per strobe. The Optical Receiver supports all Ikelite DS strobes. Camera Compatibility  This product is intended for use when triggering a strobe by an LED flash trigger or for triggering a DS strobe remotely when shooting with a mirrorless or DSLR camera. This Receiver will not provide appropriate timing if used with a pre-flash system. The strobe will fire on the pre-flash and under-power the main flash. For pre-flash camera systems, refer to these recommendations: For use with most Olympus, OM Systems, or Panasonic cameras, use the RC1 Olympus & Panasonic T